Author Topic: Stand alone progressive setup (Read 2370 times)

DDay · « **on:** August 07, 2015, 08:24:05 PM »

Want to setup a simple progressive for .25 J or B.

When I set it up it makes the penny game progressive.

Any tips for setting up stand alone progressive on GK multi 6.2 software?

thanks

Postema1977 · « **Reply #1 on:** August 08, 2015, 12:14:55 PM »

After using key chip go under the denomination tab during setup (1st of 3 pages I believe). Default is 1 cent. Simply change to desired denom and save. Then go to progressive setup tab and set your progressive parameters.

DDay · « **Reply #2 on:** August 08, 2015, 12:35:59 PM »

any idea what the levels are for in the jackpot setup?

Postema1977 · « **Reply #3 on:** August 08, 2015, 01:09:43 PM »

Levels are just for different payouts. Level 1 can be used for royal flush. Level 2 4 aces and so on.

DDay · « **Reply #4 on:** August 08, 2015, 01:23:28 PM »

I got it set up right; but, rather than posting the amount in the pay table, it just states "Jackpot"

thanks

Postema1977 · « **Reply #5 on:** August 08, 2015, 02:28:18 PM »

There should be a tab stating "jackpot setup". There you can place current jackpot , base jackpot , jackpot limit and a percentage of wager per hand to increase progressive jackpot for the set hand i.e royal or otherwise.

News:

NLG Site Navigation Menu

Author Topic: Stand alone progressive setup (Read 2370 times)

DDay

Stand alone progressive setup

Postema1977

Re: Stand alone progressive setup

DDay

Re: Stand alone progressive setup

Postema1977

Re: Stand alone progressive setup

DDay

Re: Stand alone progressive setup

Postema1977

Re: Stand alone progressive setup