Author Topic: PROGRESSIVE SETTINGS FOR QUICK HIT BALLY 6000 (Read 800 times)

drunktek · « **on:** February 01, 2024, 01:39:37 PM »

Hey guys what are the correct settings for a bally 6000 with a Dbl Blaz 7s kit. I cant get the mikohn to trigger when the 3 scatttered QHs come up just pays the 1000 credits. Any help would be greatly appreciated

sixcardmark · « **Reply #1 on:** February 01, 2024, 01:59:00 PM »

Enable progressive, then choose mikohn. Everything else has to be programmed separately into the mikohn box. If that top box has/needs a new battery it will have to be re-programmed afterwards.

drunktek · « **Reply #2 on:** February 01, 2024, 02:04:47 PM »

Thats already setup. The problem is the machine isnt sending jp signal to mikohn

sixcardmark · « **Reply #3 on:** February 01, 2024, 02:14:36 PM »

Check harnesses and power supply.

drunktek · « **Reply #4 on:** February 01, 2024, 02:26:44 PM »

Harness and ps are fine as the mikohn recieves the credit singals it just isnt getting a JP signal from machine. Its a machine setting for sure

sixcardmark · « **Reply #5 on:** February 01, 2024, 02:39:55 PM »

OK probably is, I thought you had an alpha. I don't even mess with older ballys anymore. That 6000 game is also on alpha.

drunktek · « **Reply #6 on:** February 01, 2024, 02:42:45 PM »

Quote from: sixcardmark on February 01, 2024, 02:39:55 PM

OK probably is, I thought you had an alpha. I don't even mess with older ballys anymore. That 6000 game is also on alpha.

Yes I have a few Alphas and they are simple to setup but this ones is a PITA .

Sunrise Side · « **Reply #7 on:** February 01, 2024, 04:59:20 PM »

Have you set the settings in 11d menu of the machine ?

drunktek · « **Reply #8 on:** February 01, 2024, 06:53:23 PM »

Yes I set them up just like you would set up any progressive on a 6000. There is just a setting I seem to be missing that isnt sending a JP signal to the Mikohn

Sunrise Side · « **Reply #9 on:** February 01, 2024, 07:02:44 PM »

Is there a jackpot relay chip in the socket on the backplane?

drunktek · « **Reply #10 on:** February 01, 2024, 07:30:29 PM »

Yes sir. The machine worked fine but hasnt been on in a couple years so had to replace battery and clear. Now after setting it up I appear to be missing 1 important setting in the setup

a69mopar · « **Reply #11 on:** February 02, 2024, 07:50:02 AM »

it's always a good idea to post your settings when troubleshooting.

in the machine settings, make sure option:
2 may either be 04 or 05, usually 04 (your setting should be fine as you said it's incrementing)
7 is set to 02, this is what directs it to the scattered, and is probably what you need to fix
18 should be 01
the rest are the usual.

Thanks,
Wayne

Sunrise Side · « **Reply #12 on:** February 02, 2024, 08:34:19 AM »

Decal in my 6000

a69mopar · « **Reply #13 on:** February 04, 2024, 07:28:02 AM »

?? Did you check or change your settings as posted above?

drunktek · « **Reply #14 on:** February 08, 2024, 12:36:43 PM »

Sorry was away from home on biz but the setting are as follows
2 4
7 2
18 1

Machine still does not trigger the mikohn. Could the jackpot relay have gone bad?

a69mopar · « **Reply #15 on:** February 08, 2024, 06:34:12 PM »

what is your win lockup limit set to? option 58

Thanks,
Wayne

drunktek · « **Reply #16 on:** February 08, 2024, 06:37:44 PM »

58 800

a69mopar · « **Reply #17 on:** February 08, 2024, 06:48:18 PM »

Did you try option 2 set to 5?

W

drunktek · « **Reply #18 on:** February 08, 2024, 07:05:16 PM »

Quote from: a69mopar on February 08, 2024, 06:48:18 PM

Did you try option 2 set to 5?

W

I assume if I want to change that option I would have to do a clear?

a69mopar · « **Reply #19 on:** February 08, 2024, 07:07:07 PM »

From memory, I don't think a clear is necessary. No credits on the machine though.

Thanks,
Wayne

News:

NLG Site Navigation Menu

Author Topic: PROGRESSIVE SETTINGS FOR QUICK HIT BALLY 6000 (Read 800 times)