Hi guys,
Tonight I was firing up my Bally Alpha S9000, and for some reason, it didn’t want to accept any tickets any longer. I disconnected and reconnected the Com 1 cable, and USB cable on the Bettor TITO device, pushed the red reset button, and even reformatted the game fresh. Still no change and all of the settings were correct as I always follow Jim’s TITO videos. Digging a little further on the TITO, I looked at the wiring connections, traced them to their destinations and I noticed that the RX transmitter LEDs are not lighting up. On my Bluebird, my TITO does show the RX LEDs lit. I even tried a different USB cable and power plug, and I just can’t seem to figure out what’s going on. The connectors are all hot glued to the board, so I wanted to check with Jim and you guys before I disconnected anything on the TITO itself.
Anyway, if anybody has any ideas, I would appreciate it. I also sent this message to Jim.
Thanks,
Jason