New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION
« Last post by David Walz on Yesterday at 02:58:57 PM »
Just an update on the slot machine, and specifically the coin system.

When I purchased this train wreck, "supposedly" its on free play, no coins needed to play. I have no idea what it does since the 110v cord is shredded. What I determined is that it was set up on a Ike dollar coin.

The coin assembly was obviously damaged, so I decided to start over with a sourced quarter block, I rebuild the acceptor to a quarter, sourced a quarter coin comparator, sourced a quarter hopper. Easy peasy.  :yes:
22
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION
« Last post by David Walz on Yesterday at 12:47:59 PM »
Getting the garage cleaned up for the next phase of the machine.....

As the saying goes, you've come a long ways baby.
23
IGT I-Game and Game King / Re: Help on my GameKing issue
« Last post by jimhowardjr on Yesterday at 12:46:11 PM »
Was able to find the problem after checking all the connections.  You were right!  - it was the DC power supply had moved a little and wasn't making the connection.  I pushed the board all the way back in and plugged the machine back in....I'm back in business.

Thanks for the help.

Jim
 
24
BALLY Game Maker / Re: Game Maker 7200, Hot Hot Hot setup issue
« Last post by Chris-socal on Yesterday at 12:31:38 PM »
Today is the day for 7000 series issues, guess I should turn mine on to verify its working!

Can you elaborate on what process you used to clear. Did you use a lear chip or just flip switch 8? At what point did you remove the set chip if you used it.

What setup choices did you make? Maybe you can send a picture of the blue screen with the setup options.

BTW there is a game enable, disable section in the config section of the menus. One member found his games were disabled.

25
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION
« Last post by David Walz on Yesterday at 12:30:02 PM »
Quote from: Stayouttadabunker on Yesterday at 11:37:02 AM
Quote from: David Walz on May 04, 2024, 02:42:04 PM
On to cleaning up the encoder. The encoder had a $1 set up, I changed it to 25¢. I don't know if this will work, but I will give it a shot.  :24:

You would normally have to:
1). Change the black plastic encoder coin guide to one that has the guide to force quarters to the left, so they fall between the infrared beams of the ABC optics.
2). Swap the coin head on the door to where the coin slot is smaller.
3). Install a larger diameter wheel shelf on the coin hopper plate where the quarter would sit higher up to be read by the hopper optics, and re-adjusting the wheel knife to sit on top of the shelf.

Yes, it was a $1 slot machine in a former life. It's been reincarnated to a quarter.

I changed out the quarter encoder guide, however I don't know if the electronics are going to function.
The quarter coin block is coming in the mail from Lisa a forum member.
Alan from K-LAR is getting me a quarter coin comparator ready to go, as we speak.
The quarter hopper is being sourced from Jim at Midway Slots, it should be ready to plug in when I receive it.

And a partridge in a pear tree.  :Top_Award:
26
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION
« Last post by Stayouttadabunker on Yesterday at 11:37:02 AM »
Quote from: David Walz on May 04, 2024, 02:42:04 PM
On to cleaning up the encoder. The encoder had a $1 set up, I changed it to 25¢. I don't know if this will work, but I will give it a shot.  :24:

You would normally have to:
1). Change the black plastic encoder coin guide to one that has the guide to force quarters to the left, so they fall between the infrared beams of the ABC optics.
2). Swap the coin head on the door to where the coin slot is smaller.
3). Install a larger diameter wheel shelf on the coin hopper plate where the quarter would sit higher up to be read by the hopper optics, and re-adjusting the wheel knife to sit on top of the shelf.
27
BALLY Game Maker / Game Maker 7200, Hot Hot Hot setup issue
« Last post by Bmwsyc on Yesterday at 11:31:36 AM »
Long story short, new machine to me. Did a clear (many times) and I always get to the point where the machine says Game Disabled. I feel like I’m missing something simple.

I’ve tried several different jurisdictions, coin in, bill acceptor is bad, so set that up for none. Tried both SAS and none for primary host, all of the settings that are recommended from stuff I’ve found here.
 At a loss. Any help appreciated.


28
BALLY Game Maker / Re: Could use some assistance on my gamemaker V7200
« Last post by SkyPilot on Yesterday at 11:13:50 AM »
Thanks for the help, Chris-socal.   Honestly, I did not see where to put the terminal ID....   I guess I missed where that entry goes...  I've tried a few options but will try CREDIT.
 Sorry, probably my fault as I switched both 7 and 8 when putting the new game on, (Turns out the damn game is a bad eprom, so it was a total waste.. lol)
29
BALLY Game Maker / Re: Could use some assistance on my gamemaker V7200
« Last post by SkyPilot on Yesterday at 11:08:33 AM »
Hi Guys,
Actually, I used the video you refer'd in your reply, thanks!  But the video says NO HOPPER so I did not think that addressed my issue.  Nonetheless, I did set the residual credit as it suggested.
 Thanks for looking into it, I really do appreciate it!
30
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: FOR SALE 440 Watt CP-8443 or WP210F11 PWSP. $45.00 GUARANTEED
« Last post by surplusmaster on Yesterday at 11:00:26 AM »
Hi I can sell you that unit for  $ 175.00 plus 20.00
Ground ship.

Pm me your email for a PayPal invoice.
Pages: 1 2 [3] 4 5 ... 10

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**


           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.

New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442



Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:


This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal