Hi, I have an E series 2212 by bally. Everything tests out fine but it does the non stop 3rd reel thing. I run the self checks/tests and all seems good. All reels spin freely, the optics are fine, and all clearances are fine.

Door switches are good also.

It will do fine for 1 or 2 pulls and then the dreaded tilt.

caneer's video here: https://bingo.cdyn.com/slots/809-N/pics/809-n%20-%20sticky_odds_reset.mp4

david lee's suggestion in post #16 is likely.

if you aren't familiar with servicing bally stepper units, there's quite a few videos on youtube.   The key is you want the wipers to whizz back to the reset stop without slowing/stalling.  Sometimes cleaning the crud off the rivets with isopropyl alcohol and a scrubby is good enough, but you may need to take things apart if there's dried lube on there.

 

That's like that anti-static foam for eproms.
I wonder if a place like Jo ANN's Fabrics sell craft foam?
How thick is it?  1/2" ?

Thanks I will look for it.

       WMS BB1 or BB2 Will Work .
Need Two Fuse End Cap Holders :  They Hold The Fuse In The Socket . Approximatialy A Inch and a Half Long .

if your end will send it, you can email it to slotpics@cdyn.com and I'll stuff it someplace people can see.  I have high incoming limits for attachments, but sometimes the sending server has lower limits.

if that's no good, you could try using the upload form on flyers.cdyn.com and see if that works, otherwise contact me at the above email and I'll send ya a link to a cloud drive you can upload it to.