11
Bally Electromechanical / Re: Bally 809-N
« Last post by DavidLee on Today at 01:08:01 PM »This first coin light usually stays on permanently. The second coin in, then lights up and so on.
Possibly the odds unit is struggling to advance or reset.
Best to inspect for missing springs, burnt coil, obstructions.
Also, check the switch stack for loose screws.
Make sure the contacts are on the correct side of the round peg.
Then manually advance and reset.
Possibly the odds unit is struggling to advance or reset.
Best to inspect for missing springs, burnt coil, obstructions.
Also, check the switch stack for loose screws.
Make sure the contacts are on the correct side of the round peg.
Then manually advance and reset.