I have both of my V32s on the same power strip so when I flip the switch, they both get power simultaneously and typically boot at the same speed... however, the last few times I have noticed that I power on, it appears in one of them, the MPU is not booting properly, the screen is just blank and you don't see any of the usual text post. It takes me flipping the ATX switch on the MPU off/on and then it boots fine.
It's not the monitor or power because when I first turn on you can see the monitor is powered on with he "no signal" that flashes up for a split second. then it goes blank and just stays that way (until MPU is cycled)
Any ideas what may be causing this? is it a symptom of a bigger problem heading down the line?
I did re-seat the RAM and Video card as well as all the connections but symptom still remains.
Any insight would be greatly appreciated.