Recent Posts

Pages: [1] 2 3 ... 10

Bally Reel Games / Re: Ballys S5500 button and candle lights shorted

« Last post by Fredpav on Today at 05:38:52 PM »

I should have said
Yes the machine still played when the breaker tripped.

IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION

« Last post by jay on Today at 05:12:29 PM »

Per the random wire …Do you have a hopper probe ?

I can’t tell where that wire goes but the end looks like a hopper probe.

There is a hole in the hopper where this runs through. When the hopper fills up enough to hit the probe it triggers either a hopper full or the drop door (depending if you have one).

IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION

« Last post by David Walz on Today at 05:03:30 PM »

Quote from: shortrackskater on Today at 03:51:20 PM

Quote from: David Walz on Today at 08:36:24 AM

Yes, I have been tapping on the cabinet (without the frying pan).

Like this???

Don't make me cry.

IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION

« Last post by David Walz on Today at 05:01:55 PM »

And I still can't find out where this wire goes to, all of my photos showed it hanging out of the wiring harness.

Bally Reel Games / unable to reset Bally S5500 Locked after Jackpot

« Last post by Wild Card on Today at 05:00:51 PM »

Hi, newbie here

Just bought a 1999 Bally Bonus Pas 2x 5x 10x and hit Jackpot, with music,
can not Reset after Jackpot, stuck in C.O.L - COIN IN 3 - CREDIT 0 and WIN PAID .3.17 - COIN IN: 3 - CREDIT: 0
I have RESET with KEY, rebooted, RESET from CPU.
Removed Hopper and Replaced Hopper. Everything works.
Game was perfect until I hit the Jackpot and clicked CASHOUT.
If any one can help. This was a gift

IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION

« Last post by David Walz on Today at 04:58:24 PM »

I took apart the buttons, wiring harness to locate the problem.

IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION

« Last post by David Walz on Today at 04:54:32 PM »

First and foremost, I take photo's of everything when I take a slot machine down. Everything gets photographed. Then when I assemble it, it's exactly the same thing.

I decided to take the book out on the wiring diagram, schematics, and start going through it, all 80 pages. Looking at the motherboard I checked out the plugs and determine that some bozo changed the plug location before I bought it.