Author Topic: BB2 upper cabinet light board (Read 3606 times)

johnnybgood1 · « **on:** June 11, 2016, 03:34:37 PM »

Does anyone happen to have a light board and harness for a WMS BB2 that will work with Epic monopoly, LOTR moridor, Wonka?

Blueridgeslots · « **Reply #1 on:** June 11, 2016, 03:59:19 PM »

There is more than just 1 and each theme is different, as well there are power supplies and harnesses for different themes

johnnybgood1 · « **Reply #2 on:** June 11, 2016, 04:02:38 PM »

What do I need Jim? I need epic and Moridor.

johnnybgood1 · « **Reply #3 on:** June 11, 2016, 04:03:43 PM »

Also will the game play without it?

Blueridgeslots · « **Reply #4 on:** June 13, 2016, 01:23:58 PM »

As mentioned before about the recommended configuration, however these are the top box drivers for Wonka, there is also power supplies and harnesses needed. I personally think a nice trimmed 32" PC monitor is best set up

johnnybgood1 · « **Reply #5 on:** June 13, 2016, 01:32:11 PM »

Thanks Jim,

Do you have these items for sale?

Blueridgeslots · « **Reply #6 on:** June 13, 2016, 01:58:29 PM »

What is pictured, and a set of power supplies, but not a turn key set up or any info

johnnybgood1 · « **Reply #7 on:** June 13, 2016, 02:01:38 PM »

What would the cost he Jim?

Blueridgeslots · « **Reply #8 on:** June 13, 2016, 03:22:07 PM »

Sent email

johnnybgood1 · « **Reply #9 on:** December 08, 2018, 04:37:29 PM »

Does anyone know what OS Lord of the Rings Moridor uses? I canâ€™t seem to find it anywhere.

John

buzzarama · « **Reply #10 on:** December 12, 2018, 07:54:10 PM »

Quote from: johnnybgood1 on December 08, 2018, 04:37:29 PM

Does anyone know what OS Lord of the Rings Moridor uses? I canâ€™t seem to find it anywhere.

John

S7F5 and S68D takes SSSG-000-16BB or higher. Both are H13.35 family.

yngjedi · « **Reply #11 on:** February 11, 2021, 01:56:13 PM »

Trying to put together a Lord Of The Rings machine. Ive got the topper so now Iâ€™m looking for the LED board and harness... any help would be great.

Ash100 · « **Reply #12 on:** February 11, 2021, 08:59:21 PM »

This thread is several years old.

Try starting a new topic in the Bluebird forum.

Curtis Ash100

johnnybgood1 · « **Reply #13 on:** February 12, 2021, 03:41:39 AM »

Why? The information is still valid and the questions are being addressed to those that have some experience in these games.

Eddiie · « **Reply #14 on:** February 18, 2021, 05:02:14 PM »

I miss Jim and Buzz.

If you got the topper from eBay that is Fellowship (Good), not Mordor (Evil).

For the topper controller, contact Steve and Kristel, maybe they have one more. They are somewhat generic boards that take firmware depending on which game.
I can flash the controller if you get one.

Also, a TSE / Fooler board will work in place of the light controller.

Did you say you had the game and reel strips already?

I think I know someone with the whole machine if you have 8+ foot tall ceilings. Send a message to Mr.Hockey I think his name is.

Last think to be aware of is if the game you have/look for is stand alone or progressive. If it is progressive that is another rabbit hole.

Good luck!

Eddiie · « **Reply #15 on:** February 18, 2021, 05:04:08 PM »

Can't edit my post...

Here is Steve and Kristel's email - slotbrokers@charter.net

Eddiie · « **Reply #16 on:** February 18, 2021, 05:38:44 PM »

think you need 12 foot ceiling for the original...

yngjedi · « **Reply #17 on:** February 19, 2021, 06:40:40 AM »

Thank you so much! I have reached out to them...

yngjedi · « **Reply #18 on:** February 24, 2021, 07:31:39 AM »

Still looking... everyone i've contacted doesn't have one or know how they work... ugh.

yngjedi · « **Reply #19 on:** March 12, 2021, 08:09:48 AM »

Shameless bump... still looking for this board to make my topper work.

News:

NLG Site Navigation Menu

Author Topic: BB2 upper cabinet light board (Read 3606 times)