91
Bally Electromechanical / Re: bally 1090-106
« Last post by mojorisin on May 18, 2024, 05:06:02 PM »1090-106
1090-220
1090-220
Welcome to the NewLifeGames.com message forum!
|
91
Bally Electromechanical / Re: bally 1090-106« Last post by mojorisin on May 18, 2024, 05:06:02 PM »1090-106
1090-220 92
Other Hobbies and Interests / Re: Help with Johnson Fare Box« Last post by KAHUNA21 on May 18, 2024, 05:03:24 PM »I have sprayed it, there is something inside that is stopping the drawer from coming out. I was told by K-Lar Slots in Las Vegas that this was the site to come to, they said there are people on here that know the inside workings of the Fare box. I can't see anything that could stop it from opening... Thank you for the suggestion though....
93
Bally Electromechanical / Re: bally 1090-106« Last post by mojorisin on May 18, 2024, 05:01:47 PM »is 1090-106 the top number on the plate below the handle or the bottom? The bottom is a serial number, and the top is a model number. I will respond to the rest after digesting what you said. but i will say the number is the top line 94
Other Hobbies and Interests / Re: Help with Johnson Fare Box« Last post by shortrackskater on May 18, 2024, 05:00:27 PM »I don't really see anything different at the 31 second spot.
Past that time point, I see an open lid. Is that it? If so, I'd spray some some PB Blaster and let it soak awhile... hours, a day perhaps. 95
Bally Electromechanical / Re: bally 1090-106« Last post by wolftalk on May 18, 2024, 04:54:18 PM »is 1090-106 the top number on the plate below the handle or the bottom? The bottom is a serial number, and the top is a model number.
if you are a schematic kinda person, you can find paperwork in https://bingo.cdyn.com/slots/ all the versions of a model are pretty similar, so if in doubt look at the base 1090 schematic if a dollar machine or 1090-1 if quarters. you need the coin unit step-up coil to fire, and thanks to bally's confusing nomenclature, that means you need the following to happen: 1] coin switch down for first coin, coin relay trips 2] coin switch up for first coin, handle release relay trips 3] coin switch down for second coin, coin relay powers and keeps itself powered 4] coin switch up for second coin, the coin unit step-up coil fires ... which releases the coin relay, which in turn unpowers the coin unit step-up coil and the wipers rotate on the unit. 5] repeat steps [3,4] for 3rd coin so ... coin unit = stepper unit with wipers coin unit step up coil = solenoid coil on the coin unit with the plunger that sucks in when coil powered coin unit relay = relay with switches and armature plate that pulls down onto the coil top when coil powered, changing the switch state. often the problem is the coin relay is not keeping itself powered because the "step-up arm" switch on the coin unit isn't closed. Look for the switch on the lever arm operated by the larger step-up solenoid with the yellow and blue/orange wires on it. Make sure switch is closed unless the plunger is in the coil (you can test by manually pushing in the plunger and watching the switch). this video may help to make sure the relay coils/solenoids work: https://bingo.cdyn.com/slots/videos/50V_Jumper_Testing.mp4 96
Bally Electromechanical / Re: bally 1090-106« Last post by mojorisin on May 18, 2024, 04:50:45 PM »The first coin in actives the re-set coil in the middle So after messing around.. after initial coin drop the coin reset coil activates and the solenoid works and resets. second coin the step up coil/switch responds but the corresponding solenoid does nothing. at this point, dropping another coin gets no response until I manually hit the step up solenoid. after pushing in this solenoid then the next coin drop responds with the step up coil/switch. My apologies if I am not making much sense. 97
WMS Williams Video / Re: Button lights not working« Last post by Coloradonewbie on May 18, 2024, 04:23:53 PM »All of them are lit except for the bottom one 24 volt
98
Other Reel Games / Games of Nevada - Won't stop spinning« Last post by ldjamin on May 18, 2024, 03:52:09 PM »Hey Folks, I finally retired and now working on all those "projects" I've been saving up. I last posted here back in 2020! And I received a lot of great info from "63mini", "SolidSilver", "Op-Bell" & "Slot Tech Mike".
I did do some additional research and found a GON discussion in the 2016 archives before posting but didn't find anything that helped with the issue I'm having. The machine is a dollar slot that accepts Susan-B and full-size dollars. The issue I'm having is that when powered up, it continues to spin without pulling the handle or inserting a coin. Mine also has the "free spin" toggle switch on the phenolic stepper board as described in the 2016 thread. (see pic) However, it doesn't seem to change anything when moving it. Additionally, while getting back up to speed on this from 2020, I found some old notes that reminded me that when I got the machine, the previous owner stated that a couple of the relays had fallen out and he stuck them back in where he "thought" they went . That said, I'm wondering if perhaps someone that has one of these in working condition may be able to provide me with a list of the relays and which location they are inserted? (see attached pics) Any additional info/advice/suggestions would be much appreciated! Thanks in advance, Lance 99
WMS Williams Video / Re: Button lights not working« Last post by dragster73 on May 18, 2024, 03:11:24 PM »Check these LEDs on the Backplane board
100
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: Software Sale Aristocrat, WMS, Bally, Konami KP3 (Updated 18May2024)« Last post by gunnerbill on May 18, 2024, 02:59:23 PM »Update: Added aristocrat game for sale: Lightning Link/Cash - Heart Throb LL (1.01-63838)
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |