71
Aruze Reels Slots / Re: Bill validator Jam
« Last post by LifeTilt on May 26, 2024, 08:22:39 PM »Count the number of red blinks. It will repeat that number over and over.
Welcome to the NewLifeGames.com message forum!
|
71
Aruze Reels Slots / Re: Bill validator Jam« Last post by LifeTilt on May 26, 2024, 08:22:39 PM »Count the number of red blinks. It will repeat that number over and over.
72
IGT S3000 Reel Games / Re: Change denomination« Last post by LifeTilt on May 26, 2024, 08:13:34 PM »One possible option. (If others don't chime in with an alternative.) If you have a diagnostic key (After first writing down the options / settings as a precaution) Would you be able to clear the safestore and the cabinet memory and set it up again?
73
IGT I-Game and Game King / Re: IGT Game King Multigame doesn't boot up« Last post by Tilt on May 26, 2024, 07:22:52 PM »Oh ok, good. Yes, here's a schematic for the motherboard.
74
IGT S and S-plus Reel Games / Pinball S+ Top Bonus Hit« Last post by CBRed on May 26, 2024, 06:40:13 PM »Hello all,
Not sure if this is allowed or if this is thread to share this, but thought some might appreciate it. I love Pinball have an S Pinball machine. I have been filming when we get the 100 credits in the bottom in the hopes of capturing the top bonus with all balls in the bottom since (as far as I’m aware), there aren’t any videos of this publicly/readily available for the older cabinet Pinball. Never really thought we would hit anytime soon, but got super lucky and got the top bonus! I posted the video on YouTube for documentation purposes, so I’m providing the link if anyone is interested in checking it out. It was a pretty cool animation when it hit! Thanks to this group as well to help me get the machine up and running smoothly! 75
Bally Alpha Reel Games / Re: bally alpha small screen touch not working« Last post by armyaviation on May 26, 2024, 06:36:14 PM »I have the complete panel available, this came out of machines that were taken off the floor, supposedly working. I have no way to test it. I appreciate it. Let me get back with you this week and I will let you know thanks 76
IGT I-Game and Game King / Re: IGT Game King Multigame doesn't boot up« Last post by kmarrocco on May 26, 2024, 06:12:49 PM »Thank you. I can contact member lookes. He just helped me with a different MPU from a different game. Are there schematics available for the mother board so I can ohm it out? Thanks!
77
IGT I-Game and Game King / Re: IGT Game King Multigame doesn't boot up« Last post by Tilt on May 26, 2024, 05:57:15 PM »Member Lookes can test/repair them. I could be also be your motherboard. There's a few resistors in the circuit for the door circuitry on it.
78
IGT I-Game and Game King / Re: IGT Game King Multigame doesn't boot up« Last post by kmarrocco on May 26, 2024, 05:54:36 PM »Thanks for the feedback. It is 0 ohms with the plunger pulled out. I guess the next step is to try another MPU board or mother board. Does anyone on here test MPU boards?
79
IGT I-Game and Game King / Re: IGT Game King Multigame doesn't boot up« Last post by Tilt on May 26, 2024, 05:44:30 PM »Pull the door plunger out and with your multimeter check for continuity between J19 pin 4 and J11 pin 1 at the motherboard. Leave the cabling plugged in when you do it. You should have 0 ohms, if it's open then you have a wiring or switch issue. If it shows 0 ohms then you have a problem either with the motherboard or the MPU as you suggested.
80
IGT I-Game and Game King / Re: IGT Game King Multigame doesn't boot up« Last post by kmarrocco on May 26, 2024, 05:17:14 PM »Thank you for the diagram. I have traced it out and I believe I have all the connections from the mother board to the switches correct. Further, I have tested each switch with my ohm meter and they seem to be working correctly. Unfortunately, I am thinking the problem is in the motherboard or the main MPU board now. I am struggling a bit here because I do not have another main MPU board or motherboard to try out. Any suggestions? Maybe I need to send either of them out for testing?
Also, I see that only 3 of the 5 yellowish LEDs are illuminated on the main MPU board. Is this an indicator that something may be wrong with it? |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |