Model: Falcoln Crazy Kong
Tip: Pinout
Seems there are several different pinouts on the web for Crazy Kong and I could not get any of them to match up with the ground and power pins on a Crazy Kong game that was on the bench.
This is the pinout for the 18/36 pin edge connector version of board. This particular board has 2 edge connectors on it and both are the exact same pinout, but the connector slides on upside down on the edge connector on the side compared to the one on the end of the board. This is for the edge connector on the end of the board, looking AT the edge connector from the edge of the board:
Parts Side Pin Solder Side
Blue Out 18 P2 Button 1
Red Out 17 P2 Left
Sync Out 16 P2 Right
P1 Left 15 Green Out
P1 Right 14 P1 button 1
P1 Start 13 P1 Coin
P2 Start 12 P2 Coin
N/C 11 P2 Down
N/C 10 P1 Down
+5v 9 +5v
Gnd 8 Video Gnd
P2 Up 7 N/C
P1 Up 6 N/C
+12v 5 +12v
Speaker 4 Speaker Gnd
Gnd 3 Gnd
Gnd 2 Gnd
Gnd 1 Gnd