WTB: IGT S+ 4th of July round top and belly glass

[anchorbru@outlook.com]

Thanks for the add.  Wealth of knowledge on here and already appreciate so many peoples posts.  I was wondering if anyone could help me locate a place to purchase new glass for and igt s+ 4th of July round top?  I am not too sure but mine seems dull or maybe faded.

[rickhunter]

Based on the fade, it doesn't even look like original glass. Is it even glass or plexy.  Looks like someone just made a copy a printed it and put it on glass or plexy.  The fade is way too even to be caused by the backlight. Backlight fade is usually in the middle of the glass and the color gets brighter as it reaches the edges where the backlight is not a bright.  4th of July was one of the premium games for the S+, finding someone who is willing to part with a set is going to be difficult to find.  You will probably have better luck getting a whole kit like double diamond or other game, but who knows, you could get lucky.

[anchorbru@outlook.com]

Current is plexi, looks to be legit and won’t someone’s attempt to copy.  It just looks sun faded.  I would like to get my hand on replacement glass.  I know that is probably not possible but figured I’d ask.

[Jim]

the glass is around, I spent a lot to replace the faded plexi in a S+ I have, haven't installed it yet.

[rickhunter]

IGT does not use plexi for the S+, you have an aftermarket "solution" in your slot.  All the plexi I've ever seen has been off market.  You can easily tell because I don't think IGT ever used either Plexi or single pass color printing (always used layered a layers, because it is really the only thing that works well with the type of backlighting used on these machines).

[anchorbru@outlook.com]

Jim where did you find it?

[anchorbru@outlook.com]

the glass is around, I spent a lot to replace the faded plexi in a S+ I have, haven't installed it yet.

Hey Jim do you have part numbers for the upper and lower glass?

[ALIDMAN]

I have machine in my collection , if you need part number let me know and i will pull it out , tnx ALI

[anchorbru@outlook.com]

I do need the part number but am having a hard time finding for the two coin.

[rickhunter]

You might want to give sunkist graphics a call, they could probably make a new set for you, but it will be expensive.

http://sunkistgraphics.com/

[Jim]

I have had this glass for some time.

3 coin belly is 88843800
2 coin belly is 88843700
3 coin award is 86086100.

just curious, why would you need part numbers?  they only made one version of the glass.

Jim