Correct Bally Alpha Blazing 7's Reel Strips?

[SlotMachine4You]

I have the software below and it don't seem to match the reel strips I have.

Can anyone tell me which reel strips are the correct ones?  Better yet, a picture would be nice.  I'm hoping its just a matter adjusting the strips on the reels. 

The machine is also pictured.

Thanks,

Mike

[rickhunter]

You have the older style alpha cabinet.  I believe the program for that machine is the one that uses the PCI eprom board.

[SlotMachine4You]

Thanks Rick,

I do have the eprom board installed.  For some reason, with what I believe to be the original software (pictured), bios and eproms installed, I received the error message in the first picture.  I could not get passed this so I went searching for other software.

Yesterday I was able to load the new software successfully however, the strips were not an exact match.  There are extra single bar symbols on each reel, which I was able to cover up.  Other than that, everything works fine and the rest of the payouts match the payouts.

Thanks for your reply.  If anyone has the correct reel strips for the software listed in my first post, please let me know.

Thanks,

Mike