i recently purchased this S2000 machine from a private seller...It has an enhanced board with an R-board attatched...the main battery was low, and the varta battery was still attatched when i got the machine...i removed it, along with cutting the leads on u16. reprogramed the machine to the settings I wanted. I installed a new 2354 battery....machine worked great....was off for 3 days..turned back on, low main battery displayed...replaced 2354 battery again...machine played great...was off for 2 days...turned back on....main battery low...this time..replaced the battery, checking the voltage of 3.26 dated it and installed..that was 1-17...machine worked great...turned on last night...low main battery message. machine has always been plugged in, just turned off on the main power switch
have doubled checked the u16 connection as out of the circuit (is still mounted on board, but all 3 terminals are cut...main battery says 2.69volts...any idea of what is draining these batteries in such short time?
thanks!!!
Steve