New Member - needs help getting S2000 machine up and running

[mkthompson]

Hi y'all:


I'm Mark from Minnesota. I just joined this site for purely selfish reasons: I have 2 slot machines I know nothing about and neither one works. I'm fairly handy and have some electrical experience but this is a whole new ball game for me. First off, I need to find info (wiring diagram/schematic, manual, user guide, etc?) for my Triple Diamond IGT reel slot machine. S+? Its displaying a Display Net Plex Link error and a RAM error. It also appears to have had the reset lock removed from it? See photos below. I got the machine fairly cheap so it would not surprise me if its missing parts or not able to be fixed. But I figured I will at least give it a try!

[qbert]

Welcome to NLG Mark.
From your photos that is an IGT S2000 type machine.
We should be able to help you here.
From what I can see it is missing the bill validator and printer. Read over the S2000 section of this forum.
Post these pictures and one of the MPU board that is located on the lower left side in the metal tray.  Only remove and install parts with the  power off.
Post your questions to new topic in the IGT S2000 section of this forum.
 
Rich

[knagl]

Welcome to NLG from a fellow Minnesotan. As mentioned in the previous reply, you have an IGT S2000, and it appears to be missing the bill validator and printer. It certainly can be fixed and the members here will help you get up and running. I have moved your post to the S2000 section.

I see you're a contributing member (thanks for helping to support the site!). One of the perks of that is access to the downloads section where you'll find all sorts of slot machine documentation.

Look for the tiny "Downloads" link at the very top of the page to access it, and the S2000 section is under IGT games.

Also, be sure to check out the FAQ post in the S2000 section of the forum (click here) for lots of commonly asked questions and answers.