(Help Needed) IGT Game King Disable Hooper (have all chipkeys)

[arcadeic]

Greetings from Las Vegas,


Since I cant upload the pictures I have due to size, here is a google drive link with the photos of the board

https://drive.google.com/drive/folders/1AW3H_2BgzL3ZTeoXvVs4XNxxN1Pnp7_m?usp=sharing


From the research I looked into, its not a 3902 board? So we used a chipkey 40. Reset all the 3 options, confirm. Reinstall gamechip, boot up with data errors. Get through all of those and get to the main game screen, but with errors on the screen that cant be cleared (hopper). The one we need to fix, is the hopper as this machine doesnt have one. There isnt a chipkey menu that I can find, just the standard operator menu that you can change denominations and other settings, but nothing to actually turn the hopper off. Its 'greyed' on, so you can turn it off.


I tried the 22? chip and it froze when it started to apply its settings. So were kind of stuck.


This is my father GameKing slant machine, so any helpful information would be appreciated.

[Tilt]

That is an 044 board.  You need to use Key 28.

Pictures have to be under 1MB to post here so you may have to resize them to get it below that number.

[wizeone]

like tilt said, you have a 044 setup, need key28 or a boot39 chip(helps get past some errors if the flash board has issues like sha/zero check).  contact RB here on the site he can help you with getting them.

[arcadeic]

Much appreciated. Thanks for the information. I was hung up on the board version. Thanks again.