IGT S2000 Hopper - Wiring Harness

[KAM!]

Hello, I am new here and have jumped into the ownership of Slot Machines. I recently purchased 2 machines, a Double Diamond S-Plus and a Sizzling 7 S-2000.
I think I have been fairly lucky as I have identified and repaired the basics on both machines to the point where they are "functioning" but have a lot of questions I am still seeking!

Today's question and focus is on the S-2000 Sizzling 7 machine, it is a $1.00 machine that uses token coins. The hopper has a broken wiring harness and when it cycles for a payout it produced a CODE 3200 (hopper timed out). I am hoping to find a replacement wiring harness and am wondering are they the same for all hoppers?
 
I have enclosed pictures of the hopper, broken part, and harness. This is the way I bought the machine. I have also included a picture of the wiring harness hopper for my S-Plus Double Diamond machine (.05 Coins) that shows the part #. I tried swapping the hoppers and cycled the Double 7 machine I got the CODE 3300 (empty hopper) obviously the coins are different and it was empty.

I will hold my other questions for later and I welcome any direction or suggestions on making the proper and correct repairs.
Thanks in advance for your help.
PM's welcome

[RB]

S plus and S2000 hoppers are different but the Sizzling 7 machine pictured is a S plus not a S2000. Looks like you need a hopper optic.

[Stayouttadabunker]

You might wanna contact the fella in this link below to see if they have the hopper optics you want for your S+ machine...he's a member here...They're called KLAR...>>>

https://www.ebay.com/itm/334584047617?

JIM of Midwest slot parts might have it also...
His shop phone number is listed as...>>>    1-513-984-2201

[KAM!]

 Thank you for your replies. I was able to connect with Jim and also purchased the wiring harness via the eBay link. Thank you again!

[off-track]

Don't want to hijack but..

Is the coin out optic pictured HOA6267-004, 379 037 90, 1200 for large coins?  I see that this is a $1 machine.  My $.25 denomination S+ recently cracked the wire side of the sensor because of a multiple coin jam.  It is a HOA6267-1, 379 020 90, 8919.  If so, what's the key part number that differentiates the two?  I tried googling without any success. 

We were able to super-glue it and it works, for now....