S+ error code 61-2

[CVslots]

The belly door is where the bottom panel of glass is. Look for a little knob on the outside of the frame the glass sets in. Pull on the knob and pull the frame down and towards you, the belly door will hinge down (towards you).

[Jules]

Got It! Opened the door, attached 2 wires and now I have sound.  I still am having problems with the 3300 error message right when I turn the machine on.  I can clear it by pressing the self test button, for a little bit and then it lights back up again.  I have tried dumping my hopper and shaking any coins out 2 or 3 times with no luck.   When I am able to make the reels spin maybe 1 time the hopper motor will run even though there is no matching symbols and occassionally credits will show up on the display.
Any way I have 1200 coins in my hopper so I know it is not low.  Wondering if I need to do another reel clear or what to try and do in order to straighten this out and get rid of the 3300 error?

[CVslots]

Glad you got the sound fixed. May I suggest you start a new thread, addressing only the current issues at hand? This thread has grown very, very lengthy, and it is difficult to keep the issues straight and know what has been resolved and what hasn't. You will get more responses as well.

[therockinelvis]

The 3300 is fixed by opening and closing the door latch. Are you hearing the hopper spinning? If yes, you may need to adjust the knife or replace it. Did you try to cash out? Is that why you are at 3300? I agree start a new post for hopper problem.

[TexasMark]

Got It! Opened the door, attached 2 wires and now I have sound.  I still am having problems with the 3300 error message right when I turn the machine on.  I can clear it by pressing the self test button, for a little bit and then it lights back up again.  I have tried dumping my hopper and shaking any coins out 2 or 3 times with no luck.   When I am able to make the reels spin maybe 1 time the hopper motor will run even though there is no matching symbols and occassionally credits will show up on the display.
Any way I have 1200 coins in my hopper so I know it is not low.  Wondering if I need to do another reel clear or what to try and do in order to straighten this out and get rid of the 3300 error?

As you know 3300 means hopper low. It throws up this error when the hopper runs for a certain time without spitting out a coin. Make sure you have the right coin wheel, shelf wheel, the pinwheel is not worn out, and the knife is aligned property.  What denomination coins are in your hopper? There is a self test option to have it pay out 10 coins so you can watch and see what is happening with the door open.. 
 

[knagl]

To prevent duplicate replies, I'm locking this thread now.  All replies for the 3300 error should please be addressed in the following thread:

S+ 3300 Headache