71
WMS Williams Video / Re: Button lights not working
« Last post by dragster73 on May 18, 2024, 02:04:01 PM »You'll need to check the voltage to the lamps.
Welcome to the NewLifeGames.com message forum!
|
71
WMS Williams Video / Re: Button lights not working« Last post by dragster73 on May 18, 2024, 02:04:01 PM »You'll need to check the voltage to the lamps.
72
WMS Williams Video / Button lights not working« Last post by Coloradonewbie on May 18, 2024, 01:06:57 PM »Williams bb1 sherwood treasure.
Button lights not working. I tried replacing harness and even hooked up a working deck to it so I know it's not the bulbs or harness. Could it it be a power thing or the backplane. Any help appreciated Ken 73
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by Sunrise Side on May 18, 2024, 11:43:19 AM »Grey and Grey/ Yellow are both a logic ground according to the drawing.
74
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: WTB MEI interface board for IGT - P/N 252019034« Last post by Brownie1977 on May 18, 2024, 11:24:41 AM »Sorry, but I have already ordered one from somewhere else. Thanks for your response though. Maybe mark it found? 75
Bally Electromechanical / Re: Bally Slot Machine« Last post by mboessen on May 18, 2024, 10:42:39 AM »Hi, Mark:
Thanks for the encouragement! I think I can probably do it. I remember my first jukebox, a Wurlitzer 2700. After getting a good manual, it took me most of a month to learn the vernacular and the correct names of parts so the guys on the forum could help me. I suspect this will be the same, and I am kind of dreading that, as memorization has never been my strong suit and is worse at 71. Before I invest that kind of time, I really need some idea where I will be at financially. Hopefully someone here can help me with a part number for the missing chassis and some idea what it should cost. Looking at that 24 pin connector, I imagine it is something fairly complex. Concerning the stand, I see what looks to be a coin chute that exits through the bottom of the machine. Not knowing what it is for, I have to presume any stand will have to accommodate that, and whatever goes beneath it. I'll wait to hear from the experts. I'll be out of town until tomorrow evening. I'll check my email then. Best Mike 76
Other Hobbies and Interests / Re: Help with Johnson Fare Box« Last post by KAHUNA21 on May 18, 2024, 10:09:52 AM »If you go to :39 you will see the drawer that does not/will not pull out..
77
Other Hobbies and Interests / Re: Help with Johnson Fare Box« Last post by Chris-socal on May 18, 2024, 09:32:15 AM »Shortrackskater and I are both in “squirrel “ mode!
Let us see more. 78
Show off your Home Game Room / Re: Best Slot Hits at Home« Last post by Chris-socal on May 18, 2024, 09:29:08 AM »Congrats! Very cool you caught it on film! Nice looking machine.
79
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by David Walz on May 18, 2024, 09:22:31 AM »Important lighting information, the fluorescent LED has two makes, one needs a transformer to work, the other just plugs in without the transformer and starter.
80
Other Hobbies and Interests / Re: Help with Johnson Fare Box« Last post by shortrackskater on May 18, 2024, 09:13:28 AM »I'm just curious here now. I work with antique mechanical slots and payphones (not on this forum which is generally more "modern" stuff)
Can you past larger photos of the front, back and maybe bottom? I'd like to see how it comes apart. |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |