This one is the printer, this one is the acceptor, and this one... is for tokens

[crisiswhatcrisis]

...  No, wait... This one, this one goes in the acceptor, this one is for tokens, and this one goes in the printer...   


I have a T340+ board with POG 510 roms on it,
Three or four 22" open-frame LCD (supposedly) touch screen monitors with no name or info anywhere that have VGA, 12V and a RJ-45 port on each...
An open-frame 19" LCD that has VGA, 12V, and DB9 connectors..
I have a few Cherry Master harnesses...
A five gallon bucket of button/lamp/microswitch combinations...

What I don't have is a cabinet...  Bill acceptor...  Coin/token acceptor...  printer...   sanity.... 

I had planned to mount one of the screens and some of the buttons into a vintage console stereo unit I have already made into a Bluetooth jukebox and with a switch-flip, voila, a pot-o-gold machine to kill time with in the den.   

Problem?  I have the harness pinout for the edge connector, and have managed to get the thing to come up and show video and it works, but I don't have a clue what buttons, key switches, and other things go exactly.   Attendant switch goes from attendant switch between one of the grounds?   Does it depend on the main, logic, and cash doors to be normally-closed (ie., "locked") and by disengaging the key switch (opening the circuit) or is it only mometary, not latching NO or NC ?

Solution?  I can make the harness match electrically but if anyone has any details on that sort of info I need, could you throw me a line here?    Every one that I run into around here that's got a herd of their own won't give me the time of day about it.... Hoping for different experiences, y'all

Thanks in advance,
J

[delfin]

Have you the schematics for this games?
Not ? Please let me know at udesat@hotmail.com .


Thank you !!