Have an 044 board that's showing a "Door Open M" error. It has something to do with the board, not the machine. The board fired up with a game installed, but showed this error so it would not function. When a known good board was installed, there was no error showing, thus eliminating machine optics, switches, etc. The board also shows some corrosion . Could the corrosion be causing the error? Whats the best method to remove the corrosion and by doing so could it possibly clear up the error problem? I have another board with no corrosion (missing chips and an aluminum capacitor) that I am planning on transferring parts to and see if that will work. The 2nd board is in unknown working condition. I'd like to thank Barry(777sizzler) again for gifting me the 1st board, giving me a fighting chance at coming up with at least one good board out of the two, much appreciated. If nothing works, is there anybody here on NLG that does board repair or could check the board out? Also does anybody have or know where to get that missing capacitor: aluminum capacitor 470 EFC. 7J3, Digikey has one that's "close", but $14 shipping for a $.56 part is a little out there? Thanks much.
Chris