WTB - Looking for a replacement power supply board for the CHAMII+

[jms7465]

The CHAMII+ board itself seems to be working fine, but the power supply went south on me last night.
I really just need the card, or if anyone has a repair option or suggestion.
PM Me.
Thanks
JIm

[qbert]

Check with Rudys I think he sells the whole power supply pretty cheap.

[stormrider]

The CHAMII+ board itself seems to be working fine, but the power supply went south on me last night.
I really just need the card, or if anyone has a repair option or suggestion.
PM Me.
Thanks
JIm

What's the problem with the supply ? you didn't say
make sure all connections to supply are good and tight
look for broke or loose pins where harness plugs into supply,
could be bad caps.

These can be had for cheap I'm sure any of the vendors here
can fix you up,I think raz410 a member here has them too
give him a pm.

Tim

[stormrider]

If your handy with a volt meter
you could also test for proper voltage.

Me I like to tinker and fix things
but you might be better off buying another one
if you don't like to tinker.
Always best to have at least 2 of everything anyway.

Tim

[jms7465]

I think I'm all set. I have a new one on the way.
I do like to tinker, but these new machines are taking up a lot of time frome other priorities.
(Have all the engredients for 10 gallons of American Pale Ale and a near empty kegerator! )