IGT PE+ Multipoker autohold feature may be switched on and off

[jancsi]

Helo!
I collect one old IGT PE+ Multipoker  13" CRT without bill validadator.It use XM00013P+XMP00025 set, with autohold feature, what I like.
I would like sometimes switch off autohold, but in this game it can not be switched on and off it.
Has any PE+ Multipoker set with  autohold can  switched on and off by player or by operator in operator menu?If available this game set what is it's number?
Jancsi

[jancsi]

Here is some picture.
When I collect it, it was X000459P+XP000155 Joker Poker in it, with CG2296 and CAPX2174.
I converted it back to Multipoker as belly glases says. I change only game eprom and data eprom to XMP00013p and XP000025, that match the original  CG2296 and CAPX2174 sets.

[CW880]

I know there are games which have the Autohold/No Autohold option in the menu but I am not sure of the chipset numbers. BrianT has a post with information in spreadsheet format and you could also test the different games in MAME to see what options are available.

[videoporker]

FWIW.I've setup and played many dozens of PE+ poker games through MAME and very few of the hundred plus ROMs I've used have had autohold.
I would enable that feature if it was available on most of my games.

[jancsi]

I checked Multipokers  PSR documentation the following Multipoker prgrams has autohold function:
 
XMP00002
XMP00003
XMP00004
XMP00006
 
XMP00008
XMP00010
XMP00012
XMP00025 autohold always on
 
The first 4 and XMP00025 available in mame.
 
I used XMP00025 with XM00013P autohold always on.
Than I changed my XMP00025 to XMP00006 autohold selectable in operator menu.
Then I changed the data chip from XM00013P to XM00008P autohold function disappeared completely.
It looks not all data chip contains autohold informations.