Author Topic: Code Error (Read 777 times)

kafratman · « **on:** November 26, 2019, 08:59:12 AM »

I have a Williams 5 reel Golden Chariots. It has a code that says Reel Tilt Payline 20 Display Command Timed out. I've tried resetting and even powered off. How do I correct it. Thanks

rickhunter · « **Reply #1 on:** November 26, 2019, 11:32:50 AM »

Did you recently setup the game or was it working before and you got the error?

kafratman · « **Reply #2 on:** November 26, 2019, 01:36:22 PM »

It has been working and then went in the error mode after i hit repeat bet. Thank you with past replys you have been a big help. Most recently I replaced the Power supply but that was a month ago been working without issues.

rickhunter · « **Reply #3 on:** November 26, 2019, 01:57:34 PM »

The payline displays are operated by the SPN bus, they are connected by a series of what looks like ethernet cables, they also operate the reels. Re-seat all the cabling (with power off). There should be a cable that goes from the backplane to underneath the reel shelf, then several cables go out from there to the extra bet button controller, another one that controls all the LEDs under the reel window that show credits, lines played, etc. plugged into the left side'ish of the door below the reel windows, and another one that controls the bet line displays on the right side of the door if memory serves me correct. I will look at my machine tonight when I get home to verify, but I'm pretty sure those are it.