Hello all. I am trying to get an SPC2.5 working on an Aussie MK6. I have read the US manuals and I can see that serial port to use is P19 and P23. This maps to SOUT2 and SIN2, which is output on P15 on the Aussie back-plane when using the 410748 CCB. I know this port works, as I have been using it for a different protocol.
Currently the game is not seeing the SPC board, so clearly I have something wrong.
I guess the first question I have, is that the SPC2.5 board has LED for transmit and receive. On P2 (Gamma/EGM), the LED is flashing, and when I look at the data on an oscilloscope it looks like its sending 2-3 bytes repeated. Is this normal? Does the SPC transmit data on P2 even if not connected to the EGM?
When I look at the diagnostic page for the SPC, it does not show any data being received or sent.
I can use my logic analyser to verify the data that is being sent on P2 if needed.
Second question, do I need the SAS port connected and polling before the EGM will see the SPC2.5?
Thanks,
Bogan.