Author Topic: IGT Double diamond S Plus, RESTORATION (Read 1627 times)

David Walz · « **Reply #20 on:** April 20, 2024, 05:02:49 PM »

More takedown, removal of the handle assembly, the meters.

David Walz · « **Reply #21 on:** April 20, 2024, 05:11:06 PM »

Quote from: Stayouttadabunker on April 20, 2024, 03:08:58 PM

How in the world do leaves get in a slot machine? lol

On the plus side, your MPU looks fine...you better stop the corrosion to the floor-mounted motherboard, and the power supply before they get any worse.

I've been dealing with a druggie for about 2 weeks, he thought it was worth $400.00, I finally got him at $200.00. I met him at McDonald's, in the parking lot at 09:00 AM and made the exchange. And no I am not worried about my safety, I carry a Glock 9mm hollow points, full magazine. My law enforcement experience makes me paranoid, so I take precautions.

David Walz · « **Reply #22 on:** April 20, 2024, 07:44:10 PM »

More photos.

Pure surface rust, easy peasy. I was able to clean the interior of the cabinet after it was void of anything.

David Walz · « **Reply #23 on:** April 22, 2024, 06:31:24 AM »

This is a mess, coin mechanism assembly. It is incorrect for the quarter machine, parts are missing, I am going to source everything for a quarter machine, including the quarter block

shortrackskater · « **Reply #24 on:** April 22, 2024, 09:13:23 AM »

Hopefully you can get that corrosion/rust off it. Hope it's just on the surface and not pitted.
And definitely hope it's not a "Katrina" machine!

David Walz · « **Reply #25 on:** April 22, 2024, 06:15:43 PM »

Quote from: shortrackskater on April 22, 2024, 09:13:23 AM

Hopefully you can get that corrosion/rust off it. Hope it's just on the surface and not pitted.
And definitely hope it's not a "Katrina" machine!

You know that its easy peasy for me, all ready removed the rust, now its a matter of restoration. Tally-ho the fun is just beginning.

David Walz · « **Reply #26 on:** April 23, 2024, 09:02:32 AM »

Let's begin restoring the machine.
New LED bulb for the top, interior is clean, starting fresh! Installing the wiring harness.

jay · « **Reply #27 on:** April 23, 2024, 09:48:06 AM »

Looks factory new....

David Walz · « **Reply #28 on:** April 23, 2024, 05:28:57 PM »

Keep working....

Thankfully, none of the wires were butchered, nothing is really jacked up. Just a whole lot of cleaning to do.

The wiring harness is installed, parts are installed back into the machine.

David Walz · « **Reply #29 on:** April 24, 2024, 10:11:35 AM »

More restoration of the machine. Kinda like a tinker toy.

Bottom of the machine assembly, the door assembly.

David Walz · « **Reply #30 on:** April 24, 2024, 10:14:56 AM »

I need to locate a reel glass. FOUND IT.

David Walz · « **Reply #31 on:** April 24, 2024, 04:40:54 PM »

Upgrades on the lighting to LED, A much better lighting system for these "modern" machines.

David Walz · « **Reply #32 on:** April 24, 2024, 07:07:40 PM »

So, I have this piece of plastic and damn it's ugly. I decided to put it in the dishwasher and see what happens. And yes I removed it from the steel plate.

David Walz · « **Reply #33 on:** April 25, 2024, 06:21:04 AM »

The plastic after the dishwasher, WOW!
Instead of pop rivets, I am assembling it with screws, nuts, lock washers.

David Walz · « **Reply #34 on:** April 25, 2024, 12:56:43 PM »

Restoration of the door continued.

David Walz · « **Reply #35 on:** April 25, 2024, 04:51:48 PM »

More work.
After working on the buttons, button plate, I figured I'd replace these buttons they are rather pathetic. Another ABLOY lock keyed up to the slot machine, this makes it easier to work on all of the machines with one key for everything.

sixcardmark · « **Reply #36 on:** April 25, 2024, 05:20:41 PM »

The backside of that coin head looks pretty big, I believe it was still a dollar denom??

David Walz · « **Reply #37 on:** April 26, 2024, 05:37:49 AM »

Quote from: sixcardmark on April 25, 2024, 05:20:41 PM

The backside of that coin head looks pretty big, I believe it was still a dollar denom??

That's where I am leaning toward.

David Walz · « **Reply #38 on:** April 26, 2024, 07:00:50 PM »

Handle pull.... complete take down, cleaned, serviced, lubricated.

David Walz · « **Reply #39 on:** April 26, 2024, 07:02:54 PM »

Handle pull....

News:

NLG Site Navigation Menu

Author Topic: IGT Double diamond S Plus, RESTORATION (Read 1627 times)