Hey Folks, I finally retired and now working on all those "projects" I've been saving up. I last posted here back in 2020! And I received a lot of great info from "63mini", "SolidSilver", "Op-Bell" & "Slot Tech Mike".
I did do some additional research and found a
GON discussion in the 2016 archives before posting but didn't find anything that helped with the issue I'm having.
The machine is a dollar slot that accepts Susan-B and full-size dollars. The issue I'm having is that when powered up, it continues to spin without pulling the handle or inserting a coin. Mine also has the "free spin" toggle switch on the phenolic stepper board as described in the 2016 thread. (see pic) However, it doesn't seem to change anything when moving it. Additionally, while getting back up to speed on this from 2020, I found some old notes that reminded me that when I got the machine, the previous owner stated that a couple of the relays had fallen out and he stuck them back in where he "thought" they went
.
That said, I'm wondering if perhaps someone that has one of these in working condition may be able to provide me with a list of the relays and which location they are inserted? (see attached pics)
Any additional info/advice/suggestions would be much appreciated!
Thanks in advance, Lance