S2000 Triple Lucky 7’s Reel Strip Issue

[Iamwally]

Wonder if someone can help me out.  I have a s2000 Triple Lucky 7’s 2CM and I think I have wrong strips because the payouts don’t match.  Actually it’s like some of the regular 7’s seem to be acting like the Triple Lucky symbol.  So either the strips are wrong or one is in the wrong position or something like that.  I have attached a photo which demonstrates the problem as it paid 150 which means one of those yellow 7’s is supposed to be a triple lucky symbol.🤷‍♂️

Thank you,

John

[RB]

It's an AAB set.

[Iamwally]

Hard to read from photo can you tell me the numbers on those strips?

Thank you,

John

[RB]

Either your strips match or they don't but the numbers appear to be 84637500, 500, 600.

[Tilt]

What stepper base chip do you have installed?  Perhaps it's the wrong one?

[Iamwally]

Not 100% what base chip is in the machine because whoever hand wrote the sticker either mistagged it or left an old tag and rewrote the eeprom.  The handwritten sticker says SB10010 which makes no sense and is missing a digit!

Here is a photo of the strips that are actually
In the machine.  Looks like a mismatched set.  Does anyone either have the single strip I need to make it right or a full reel strip set?

Thank you,

John

[sixcardmark]

Turn the JP key and go to accounting/version accounting/more/ stepper base - and it will tell you. Those are not correct strips.  SB100010 is 2CM,  SB100009 is 3CM