IGT S2000 change out button panel

[bjhansen39]

   Hi, I have a IGT S2000 Triple Double Diamond Free Games. It was a 20 line .01 game but want to switch it to a 1 line .25 game. I was told I could change out the ten button panel to a six button panel.


                         Does anyone know how???

[Stayouttadabunker]

Remove all the button deck screws, glass, reels & reel deck, 10-button reel driver board , I/O boards & harnesses.
You will have to have correct (see all stuff above) 3-reel parts to complete swap.
It would be easier just to go find another machine... 

[bjhansen39]

Hi the game is already set up in a six panel machine not a penny machine there is no 10 panel Hooked to it it keeps looking for a 10 panel card it says thanks Brent

[Stayouttadabunker]

What is the SB base chip number?

[bjhansen39]

Hi the SB chip is 101453 thanks for all your help Brent

[sixcardmark]

Hi the SB chip is 101453 thanks for all your help Brent

That SB requires the 10 button deck.

[bjhansen39]

What SB chip do I need to get this to work and where can I find one thanks Brent

[sixcardmark]

Going to need to change to a different game, glass, reel strips, and SB that is 9 credits or less, or change to a 10 button deck.

[bjhansen39]

Okay I had changed out to a 10 panel the one I/O card inside the door is an 801 and the one outside the door is an 802 I/O card and I am still getting 10 button I/O card not found any suggestions would be helpful thank you Brent

[RB]

Sounds like it's wired wrong. Try the connections in the picture. if that doesn't work you might need 2 802 cards.

[bjhansen39]

I finally got the machine running after see in the picture of how the wiring went I want to thank everybody for their help I really appreciate it the only thing I got to do now to get everything programmed in the 20 line game thanks again for everybody's help Brent

[RB]

 

[bjhansen39]

Thanks again for your help I like to ask one more question if that's possible I have made this game a 0.25 game but it nearly takes 200 tokens the play Max bet is there any way to set this up that could take far less to play all 20 lines and Max bet if there is does anybody have the directions and how to set up the machine thanks Brent

[sixcardmark]

Your SB shows as being 200 credit.  20 lines, bet 10 times each line. You will need to do a repeat bet instead of max bet.  Maybe there is a smaller credit SB out there somewhere??

Game is Triple Double Diamond with free games.  Is that right?

Does this game use an R board?  Do you have a pic of the MPU?

[bjhansen39]

Yes that is the game it is a three reel Thanks for helping

[RB]

First of all, a 200 credit max bet machine should be coinless & not token in/out. You can change the denom with a key chip. Player denom can not be set lower than the accounting denom. If you need to change the accounting denom to say 1c or 5c, you will need to clear it first. All other denom settings can be changed just by key chipping it (zero credits). I'm almost positive you have an R board game or RG board in this case. You need RBK00001 to perform clear & or key operations. Post some pictures as Mark suggested. It really helps us help you.