In game mode there was no 5--1 / 5--2 that could be set for credit always option and no 6 option to set denomination.
So I installed a SET15 chip and instead of the usual 9--0 / 9--1 option I got a 3--1 plus there was no denomination option.
I noticed the board looked special with a manufacturers bug inside a square box with ST inside it.
The chip set was SP1160 and SS4749.
I tried a lower number SP chip, 870 I believe, and got a error code of 68. The SS chip would not work with the lower SP chip.
So I tried another board, one without the ST marking, and was able to use the set chip to enable the WBA bill validator and set the denomination.
I checked the bin file on disk and there was a notation for the SP1160 saying to be used only for boards without a DIP switch.
For future reference what is the procedure for using the set chip, or setting game options, on this kind of situation?
I put some standard game chips into the ST marked board and the board came right up and worked fine on our test machine.