S + Hopper question

[capttodd]

Can anyone tell be how to make a test wire for an S+ hopper so I can plug it straight into a 110 outlet on my workbench.

[slots4home]

Yes you can plug directly into the wall.
You have to use the 2 wires that come off the motor

[capttodd]

But the motor is DC. Not AC. I thought some wires had to be jumped on the hopper harness to run the AC on the board to convert to DC

[slots4home]

If it is a splus it runs on 110v ac

[capttodd]

Must be the wrong hopper for this machine  if I hook it up straight to the wall outlet it pops and blows a fuse, hook it up to a car battery and it turns, slower than it should but it turns,  motor has DC. 24 volt stamped on it. Was just going to hook it up in the machine not connect to the wiring harness with a switch so the kids could run the quarters out of it when they Need  more.  Thanks

[slots4home]

Post a picture of it