Started this topic as I posted on an old topic and have some info to share. (Thanks to those who pointed me in the right direction)
Using a US based JUR still has a 1200 limit on jackpot hand pays so here’s how I went about it:
Replaced the 12pos male connector leading to the meters, adding 330 ohm 1/2 watt resistors jumped vertically (1-7, 2-8, 3-9, 4-10, 5-11, 6-12)
Digikey
connector # WM3705-ND
Resistor # A142692CT-ND
Terminal # WM22163CT-ND (I used 16AWG as I folded the resistor lead over to get a good contact and crimp)
No more clicking and no tilts!
Haven’t tested on my Bb2, but the harness and meters should be the same.
Using Columbia Jur for my Bb2/3 games and Jamaica for SG games to get rid of the jackpot hand pay.
Loving the setup now.
Just wanted to pass the info and say thank you again to those who guided me in this direction.