31
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.
« Last post by Sunrise Side on Today at 10:29:28 AM »Other side of S5500 BV harness at backplane
Welcome to the NewLifeGames.com message forum!
|
31
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by Sunrise Side on Today at 10:29:28 AM »Other side of S5500 BV harness at backplane
32
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by Sunrise Side on Today at 10:20:50 AM »It looks like the grey wire from J2 position 2, goes to J13 #1 position?
33
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by David Walz on Today at 10:17:50 AM »S5500 I can barely see the back side of the plug. That's the one that I need to reconfigure. Thank you. 34
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: STILL AVAILABLE - Lot of 7 "No image, but working" IGT Dynamic Edge Lit Buttons« Last post by TheEyeInTheSky on Today at 10:13:32 AM »May 17th - Price Reduced! - The buttons are sad that they don't have a new home yet!
The 7 no image, but working buttons are still available. See below. $16/button - 7 No image, but working $15 Shipping If all 7 buttons are purchased together, I will drop the price to $112 shipped. PM me if you're interested. 35
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by David Walz on Today at 10:12:17 AM »S5500 That band aid finger photo looks mighty familiar. 36
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by David Walz on Today at 10:10:35 AM »Only difference I seen in your schematic is the BV reset button. So my J16 harness is basically wired correctly. 37
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by Sunrise Side on Today at 10:09:57 AM »S5500
38
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by David Walz on Today at 10:06:40 AM »I don't have a V5500. But the BV wiring looks the same between my S5500 and my V7000. 39
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by David Walz on Today at 09:54:22 AM »Let me check the wiring.
Then I will need to look at the backplane J16 wiring connector. 40
IGT AVP (Including G20,G23) / Re: First impressions owning a G20« Last post by sftechgeek on Today at 09:50:28 AM »Ahh, yes, I see the difference in the Crystal series. Basically the Crystal Dual looks like the G23 but runs Fam20 games? Did they do away with most of the physical buttons? So the screens are 27" and the topper can be a 3rd monitor?
That's quite a bit of $$$ to have a machine shipped up North. From Ohio to California it would cost me $400 for a pallet to be shipped. Already received my HDD from RB which is a must have if you want those Fam14 resources. Though the wife ain't too happy with my new found hobby, she's really going to flip when another machine ends up in the living room... Thanks for sharing... |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |