New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: WMS BB2 Bill Validator Jammed, Stacker Missing, etc.  (Read 465 times)

0 Members and 1 Guest are viewing this topic.

Offline Ash100

  • Contributing NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 782
  • Reputation Power: 67
  • Ash100 Is a rising star!Ash100 Is a rising star!Ash100 Is a rising star!Ash100 Is a rising star!Ash100 Is a rising star!Ash100 Is a rising star!
  • Gender: Male
  • NLG
WMS BB2 Bill Validator Jammed, Stacker Missing, etc.
« on: August 20, 2022, 04:24:31 PM »
Ok, this will probably be a long post, so bare with me.

Short version....had a BB2E that worked great for years. One day both Monitors were dark. Troubleshoot it down to missing the 12vdc at the Junction Box behind the lower LCD on lefthand inside wall. Backplane power was normal at both Aux Plugs as the E Controller works. Just nothing at either plug in the top.

Without tearing into that J Box, I decided to just swap everything over into an extra near scrap level cabinet I had in storage.

Everything works as it should with the exception of the UBA Bill Validator and Printer. Game loads if I disable them both in the Set Up, but I have no way of adding Credits to play it.

So, I bought a TITO System to get me by until I could figure out the BV and Printer stuff.

I've set up everything correctly, but Legacy Bonusing will not work no matter how many times I set it up. Tried both Comm Ports, different TITO Boards, different Power Sources and so on. Nothing. So I still can't play the game.

Searched the forum and found a lot of posts about the Jumpers on the Backplane,  all set correctly for the Validator and Comm for TITO. Even tried a different CPU-NTX2 and Backplane.

The Bill Validator hardware, Harness, Housing and UBA all came from the working machine, as did the Printer and Harness. (Working except for the Monitors)

I can get neither to work without errors. I recieve Stacker Missing, Bill Validator Jam and Stacker Switch Open. I'm sure there's not a secondary Harness that isn't connected or missing, nothing left like that in the old cabinet.

Same with Printer. Ready Light is on, but fails for Printer Comm Error.

The UBA continually cycles, so I sent it off for cleaning and ops checks. Came back as tested and working. Still has cycling non stop and BV Jam and Stacker Errors.

I bought a new one that was labeled as tested good. Same problem.

I'm about out of options here.

Anyone got any ideas that I haven't thought of yet?

There is only 1 Harness that plugs into the BV Housing. Am I missing something that is inside of the Housing that I can't see? Maybe a Stacker Switch?

I assumed that the Stacker, when inserted is sensed by the UBA.

Hope at least some of this made sense.

Thanks,

Curtis ash100
Eat 'till you're tired, Sleep 'till you're hungry

Offline iramack

  • Contributing NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 534
  • Reputation Power: 33
  • iramack Is working their way up.iramack Is working their way up.iramack Is working their way up.
  • Gender: Male
  • NLG
Re: WMS BB2 Bill Validator Jammed, Stacker Missing, etc.
« Reply #1 on: August 21, 2022, 06:18:18 AM »
Try Swapping The Backplane..................And make sure you re-seat the MPU firmly and completely!!  Might even try that first!!

SM

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal