I recently picked up another project IGT S2000. I added a new MPU battery, did a RAM clear and rekey, and disabled the printer while trying to trouble shoot the BV.
I started with trying to run the BV in standalone test mode and it never accepted any bills. When I start up the machine the BV appears to boot normally, and bezel lights up. When putting in a bill it doesn't go to far. I have tried one dollar bills as well as new fives, tens, and hundreds. It doesn't even read the whole bill before rejecting it, and depending on which unit is used it can travel farther into the BV. The hundred travels the farthest, and the one travels the shortest before being rejected.
Here is a video of what I am encountering.
https://youtu.be/mH-52DCThpc Summary: I tried running in test mode, got a bill validator comm error. Restarted the machine and showed what i am experiencing trying to get a credit loaded through the BV.
Any help on what to do next would be appreciated, I don't have any spare WBA transports or heads, trying to figure out what my next move should be. Thanks.