New $100 bills and WBA 12-13

[Brokenwizard]

I have a WBA12-13 (708bh) validator ID=003 USA V3.75 (This is what's written on it)
Question 1. Can I just replace the chip on the back so it will accept the new 100's and
2. If so anyone know where I can purchase the chip.
I know I can send the whole thing out to be updated but it would be simpler if I can just replace the chip.
Thanks in advance,
 
 
 
 
 

[Ken]

Replacing the ID=003 USA V3.75 chip with a ID=003 USA V3.8(x) chip will get you the new 100.

[foster]

The only thing is when you replace the EPROM you need to do a calibration on the head after chip is installed as recommended by JCM and just about everyone that has done it.

[Brokenwizard]

Doesn't recalibrate mean cables and or software needed? I have computers but nothing else to facilitate a calibration.

[CVslots]

We sell calibration papers for WBAs. They are a paper that is fed in and it "realigns" the head so that it reads bills properly. Often times, it is used as part of a tune-up.


Here's what the papers look like:


http://www.centralvalleyslots.com/jcm-wba-validator-paper.html

[Buzz]

Why do they call it "Paper" ?

[CVslots]

It IS paper...I guess we could call them "cards", if that makes you happy Buzz. 

[rickhunter]

Expensive piece of paper, must be military spec. 

[Brokenwizard]

We sell calibration papers for WBAs. They are a paper that is fed in and it "realigns" the head so that it reads bills properly. Often times, it is used as part of a tune-up.


Here's what the papers look like:


http://www.centralvalleyslots.com/jcm-wba-validator-paper.html

Hope I'm posting this correctly.
Before I but the paper how does it work? Do I just feed it in like a bill or are there switch(s) that need to be set?

[Brokenwizard]

We sell calibration papers for WBAs. They are a paper that is fed in and it "realigns" the head so that it reads bills properly. Often times, it is used as part of a tune-up.


Here's what the papers look like:


http://www.centralvalleyslots.com/jcm-wba-validator-paper.html

Hope I'm posting this correctly.
Before I but the paper how does it work? Do I just feed it in like a bill or are there switch(s) that need to be set?

Darn forgot to spell ck it's buy not BUT

[CVslots]

They are expensive because they can be used like 100-150 times each....


And I believe you flip a dipswitch and feed it in like a bill. The BV will suck it in and spit it out a few times. After that, reset your dip switches and your done. I have formal instructions for it somewhere. I will try and find them if they are not already in the File Download section.

[Brokenwizard]

They are expensive because they can be used like 100-150 times each....


And I believe you flip a dipswitch and feed it in like a bill. The BV will suck it in and spit it out a few times. After that, reset your dip switches and your done. I have formal instructions for it somewhere. I will try and find them if they are not already in the File Download section.

Thanks for your help but the site says currently out of stock. I'll try again in a few days

[CVslots]

Oh geez! I'm 99% sure we have more. Let me make sure today and I will update the site qty and let you know! I'm sorry, I didn't realize my site showed it Out of Stock.