uba for aristocrat

[buybestslots]

have some aristocrats   most have eprom on uba some don't  is there a file to flash ones with  eprom to us money   for aristocrats? some are uba 10 / some 11
thanks
steve

[buybestslots]

bump will a uba10 id 03 work in a mk6 

[CVslots]

ID003 works on Aristocrats. I just got some machines with them.

[buybestslots]

they came in with uba 11 with eprom  changed  uba 10 were flashed to id 03     should be right   yes?

[CVslots]

Yes, should be right.

[buybestslots]

Thanks

[buybestslots]

takes and rejects bill  but in test it show the  right bill inserted   I think  my id 03 is wrong   I think we need v1.71-16...

[Harp]

Couple of things to check for on Aristocrat Games

ID003 is the correct firmware, V1.71-16 is very old (2008) the current firmware is V2.71-51 but either will do
In your Game Options page, ensure that the Bacc limit is set correctly, this is your Bill In Limit
On the same page check your Device Options, your BV should be selected as JCM ID003
Check that you have your Comm Board located on the MPU, this is the board that looks like a stick of RAM on the left side of the board
Aristocrat games also require a Comm Board for the UBA, this board sits in the back of the Housing, at the back of the Housing where you see the Gear Cogs this is where the board sits and is connected to the BV Harness via a white connector

[buybestslots]

thanks I'll check later to today have auction  at 10am , but I don't recall a board on uba housing

[Harp]

I have attached a picture of the board that you should find in the back of the housing for use on Aristocrat Games

[CVslots]

Thanks for the info Harp! I have some UBAs that are out of Aristos that are marked 1.71-16, but take new $100s. That must have been the original firmware installed. Thanks again!

[buybestslots]

I have attached a picture of the board that you should find in the back of the housing for use on Aristocrat Games

will look   I'm hoping  casino didn't remove them
thanks now I know what I'm looking 4

[Harp]

This is how it will look

[buybestslots]

everything thing was there in dbv unit   found that this game needed a different  clear chip  the one that worked on other mk 6 would not work on this title  game is up and running at last