chip needed to change denomination in a 2000 enhanced?

[puckhead]

i need to change the denomination on a bills only,no coin s2000 enhanced? is the chip needed for that, or just go into the menu?

thanks

[jonm287]

You will have to use a keychip in order to change denoms.

[puckhead]

thanks

[cowboygames]

If you want to change the denom on a machine not capable of multidenom operation, you need to clear the machine with with a 224 or 97 clear chip, then set it up with a 45, 31 or 17 key chip. If you are changing the player denom on a multi denom machine then only a keychip is needed unless the new or desired denom is lower than the selected accounting denom. If that is the case, then you must clear the machine first, set the accounting denom at or below the lowest desired player denom, then set the player denom(s)

[puckhead]

its one of those ones you can touch to set the denom, 1 cent, 2 cent. its currently 25 cent. is there anything i need to do to make that touch selection enabled? right now its not, its just 25 cent
thanks

[cowboygames]

Check your accounting denom in menu 7.1 and if it's higher than what you want for a player denom, then you'll need a clear and key chip set, preferably a 224 clear and 45 key. If the accounting denom is lower than the player denom you want, then just key chip it and change that player denom innthe same menu