Hello all,
I have a Blade Video with a 3.2 CPU that is showing a CPU Not fully inserted error. The latch is down on the side of the cpu. I'm hoping I'm missing a jumper or loopback. This game came from storage and there is a chance that someone has "borrowed" something from the machine without replacing it.
I have tried to manually close the switch, pulled the switch and jumped, traced back to little distro board; its plugged in, swapped board with other game, replaced CPU, bulkhead and ram cleared. Put a volt meter on it and everything seems to be in working order in that respect. I know WMS likes to link the switches together so I'm sure that I'm missing a ground or something.
[/size]
Any ideas and/or does someone have a wiring diagram so I can trace the switch wires?[/font]
[/size]
[/size]Thank you for your time!!