WMS BB2 non working Host/Comm port 1 and 2 AFT
Hello NLG Peeps,
I have a WMS BB2 Wizard of Oz in a BB1 cabinet, and for the life of me cannot get the host/comm port 1 or 2 to fire up. I know most of the peeps on here never use, setup and or work with the host/comm ports but I am hopping there are a few? I have this game hooked up to the IGT SAS Simulator with no response and the Host/Comm TX and RX LEDs are not lit up on the BB2 backplane. I have setup a shit ton of IGT, WMS, Bally, ect and I know the game settings are correct. I also have a few of these working in the field and know they can be setup with a host.
What I have tried...
Swapped TX and RX on the host/comm cable and double checked the ground
Cleared and set up on host/comm 1 AFT
Cleared and set up on host/comm 2 AFT
Swapped CPU
Swapped backplane
Swapped motherboard jury and bios
Swapped game theme and OS
Made sure JP1 and JP2 are on RS232 on the backplane
(I ordered another power supply and I will try that when it comes in but all the voltage LEDs are lit up.)
Any help would be appreciated.
Thanks Peeps