need 1960's-1970's ballys 25 cent hopper

[miked5131]

easy to find? im assuming ebay?

[Badbaud]

Measure it with a Ohm meter to see if it reads 470 Ohms, those usually don't fail, they are usually used to current limit and protect a coil.If you would provide a picture of the side of the coil in question showing the part number on the coil you would have a better chance of someone having it.

[miked5131]

the wires that go into the 470 thing are loose.. the part number on the coil says KKN 850/336.. I cant find that either on the internet I found a KKN 333

[Badbaud]

Is there a number on the side of the coil, not the bottom?

[miked5131]

no, there is no insulation, just the copper showing

[miked5131]

It is a 470 Ohm power resistor.

what wattage shoud I get they come in 1/2, 1, or 2

[miked5131]

It is a 470 Ohm power resistor.

GOOD NEWS I FOUND ONE!!
Product Description Qty Unit / List Sub Total
R025W470K Resistor - 470K ohms 1/4 watt 1 $0.15 $0.15
KKN-336 Coil - relay 1 $11.95 $11.95
Items SubTotal $12.10
Shipping and Handling $8.99
Total S & H $8.99
Total Due $21.09
Page 1

[Badbaud]

Sure, go ahead, put a 1/4 watt resistor in place of a ceramic power resistor.Let me know what happens to the resistor upon power up.

[miked5131]

Sure, go ahead, put a 1/4 watt resistor in place of a ceramic power resistor.Let me know what happens to the resistor upon power up.

I know, I selected the wrong one and its going to fry.. but I don't want to change my order.. im more excited to fine the coil though.. what wattage should I get.. and HEY IM NEW TO THIS!

[miked5131]

there is this one...
Capacitor 47p 50v +/-20 axial

#5043-09844-00

Multilayer Ceramic Capacitor, A Series, 47 pF, ± 5%, C0G / NP0, 100 V, Axial Leaded

Reference:


•5043-09844-00
•A470J15C0GH5TAA

[63mini]

miked5131,


 Have you checked the resister as Badbaud suggested earlier? It should read 470 ohms on your meter. The 1/4 watt one you found will not work! You will just be wasting your time with it .


 If your ceramic power resister is bad it is probably a 10 watt.


 Also, your last post. Do you require a capacitor too?

[miked5131]

miked5131,


 Have you checked the resister as Badbaud suggested earlier? It should read 470 ohms on your meter. The 1/4 watt one you found will not work! You will just be wasting your time with it .


 If your ceramic power resister is bad it is probably a 10 watt.

I don't know if it is a resister or a capacitor .. its about 1 1/2 inches long kinda rectangle, white thing and says "470" on it..  and then there is another one that look like a small tube and that one is black and red


 Also, your last post. Do you require a capacitor too?

[miked5131]

miked5131,


 Have you checked the resister as Badbaud suggested earlier? It should read 470 ohms on your meter. The 1/4 watt one you found will not work! You will just be wasting your time with it .


 If your ceramic power resister is bad it is probably a 10 watt.


I don't know if it is a resister or a capacitor .. its about 1 1/2 inches long kinda rectangle, white thing and says "470" on it..  and then there is another one that look like a small tube and that one is black and red


 Also, your last post. Do you require a capacitor too?

[63mini]

miked5131,


 The photo you posted before is a ceramic resistor. The other item you mention may also be a resistor. I think you will need to post some clear photos of the following.


1. The overall game or post the model.
2. An overall photo of the old coil you have.
3. A photo showing the area of the "a small tube and that one is black and red"

[miked5131]

hopper

[miked5131]

25 cent

[miked5131]

model

[miked5131]

area where the coil goes. it goes in that open box area

[Amechanic]

Is there a reason your changing the resistor? Does it have a broken lead wire?

[miked5131]

Is there a reason your changing the resistor? Does it have a broken lead wire?

the wires that go into it are really loose