Setup after Ram Clear

[Painkiller2017]

Hello people, I have now done the Ram Clear but unfortunately it does not do what it should he turns the reels writes insert coins but the BV does not work although I have already activated it with a chip and normally at the beginning he pulls suf but that's it there is a list of all points of the setup setting with the instructions that are shown in the forum I can't get by the numbers do not match

[banyans]

Hey,

Im not quite sure what you're asking or if I can help, but I know these guys here are gonna want your SP/SS eprom numbers and maybe pictures of the machine and what exactly it is doing. I know from what I have read here that doing a Ram Clear should be the very last resort.

Someone on here has a saying that says something like: "The more you tell us the more we can help"

I hope you get it set back up the way you want it.

Philip

[gameking6]

Did you enable the BV with the SET chip AFTER you cleared the machine?

[metex]

what is the model of your mainboard ? 1st when you power up the machine you shoud hear some noise from the bv starting up, and set up the bv enabled and coinless mode enabled too, that is what i do on mines.