From my Personal Collection:

Pick up preferred, or buyer arranges all packing & shipping

Bally Alpha 2 Pro Wave $7500.00
Bally Alpha 2 Pro 22/32, "Titanic" $3500.00
WMS Blade 23/42 "Gremlins" $3000.00
WMS BB3 22/32 "Ironman" $2750.00
Konami KP3.0 Selexion "9 Games" $2100.00

or all 5 machines for 12.5k +s/h

What is the height of this Monte Carlo machine without the topper? anyone know?

i believe it is 72" on a stand without topper

Quote from: rickhunter on May 17, 2024, 04:09:13 PM

Remove the 2. batteries and try a clear without the batteries to see if the error goes away.  If it does, after the clear put the batteries back and do the clear again before you try to boot with os and game.

Unfortunately, running the clear on the MPU with both batteries removed gave me the same results.  I'm assuming when you said both batteries you meant both on the MPU.

sounds like a bad clear cf card or wrong one. I had this happen before with wrong clear cf card. Double check you have the correct #clear card

Replaced 24v supply. Still no button lights

second coin the step up coil/switch responds but the corresponding solenoid does nothing. at this point, dropping another coin gets no response until I manually hit the step up solenoid. after pushing in this solenoid then the next coin drop responds with the step up coil/switch.

if this means the second coin causes the coin unit step-up relay to power and stay powered (metal armature plate is held down on the coil top so a third coin doesn't appear to do anything), then:

- the switch on the coin unit step-up relay with orange/green (74-1) and red/black (18-6) wires isn't closing when the relay is powered

- plug connection issue

- coin unit step-up coil is bad.  If it doesn't appear burnt, then check for the coil wire being broken off a wire lug