Bally Alpha 2 V32 Pinout

[davisc]

Hi, All


I recently acquired some Bally video slot machines. I believe it's an Alpha 2 V32 video slot machine, no reels, just a 32" screen running the game "China Street". I'm trying to find a pinout for the hopper on J14 so I can set up a hopper fooler. Apparently since I'm new here, I can't browse the downloads section. I appreciate any help!

[idesign]

If you want to have the machine ignore the hopper, then you have to clear the machine with a clear card and reboot, set the game back up and in the DEVICE menu you can disable the hopper.  Simple as that.

[davisc]

Thank for the reply but, I'm not really trying to get it to ignore the hopper. I need to get a pulse signal for the payouts. I'm hoping to use a pulse to the hopper for a ticket system. Normally, I would use the signal from a hard meter for the payouts, but even after changing jurisdiction chips, I can't change the meters to give me a total out. So I'm trying to work around that.

[FireballJackpot]

A "redemption" slot machine (It dispenses tickets like at Dave and Busters) - .  Interesting.  I've seen them on 8-Liners, but not Slots. The 8-Liners had some aftermarket (looked like hand-made/bread board) board wired into the harness.  Unfortunately, I don't have any info on them. That was years ago....  But see photo for your J14 pin out.


Hope this helps!

[onetech]

If your wanting a pulse system for the hopper to do like ticket redemption ( like arcade games). RKS Really Killer Systems has a hopper fooler for Bally. Takes the info from the hopper and sends out a pulse signal.

[davisc]

@onetech We're actually using the hopper pulse collector from RKS (We use a lot of their products) but it wasnt working because it wasn't pinned correctly, hence why I needed the pinout.


@FireballJackpot Thank you! That's exactly what I needed.

[onetech]

@davisc, That's great. Jim and Tony are great. I have used their products for many years. Little fact, I was the one that worked with Jim to get that Hopper Fooler developed for a project I was working on. Glad it is still useful for other people.