3300 error code

[Jim]

post  the settings you took a picture of.

would like to see them.

Jim

[Contractorblue]

Test page

[rokgpsman]

yes, that 2nd photo is better. Below I enlarged it a bit, tried that on the first photo but it became unreadable when enlarged. We don't have much information on the S models (compared to the S+) so anything like this you post about your machine will be helpful to others with the same model.

So is your S machine working as it should now?


(click image to enlarge)

[Contractorblue]

Yes it does seem to be working properly as i said before just wpmdered if any other settings were wrong

[Badbaud]

Attached are the input tests.

[Contractorblue]

Thank you i will see if i can make sense of it

[rokgpsman]

Yes it does seem to be working properly as i said before just wpmdered if any other settings were wrong

If it accepts your coins ok and pays your winnings (either to credits or coins from the hopper) then that means a big part of it is working fine. There might be some limit settings that you want to change but that's just personal preference. On some machines you can set how big of a win will get paid from the hopper, any winning spins over that will cause the machine to halt and signal a "Handpay" event where a casino person would come over and pay you personally. For home player you just reach over and turn the jackpot reset key and pretend someone handed you some money.

You can set the hopper limit to a low or a high value. Depending on how many coins/tokens you plan to keep in the hopper, you can set it to a good value for yourself to keep the machine from paying out all the coins and then giving a "Hopper Empty" 3300 error. If you have all the wins going to credits then you might want to adjust the credit limit upward. If the credit limit is too low and you get a big win then the machine would add to credits up to the limit, then pay from the hopper. (I think)

[Contractorblue]

Ok thank you i believe it is working fine in respect to the things you have described