Bally E-2099-17 Lights on but nobodies home

[Amechanic]

I tried a couple time to upload the short video here, but I keep getting an error message. If you PM me your email address I can try forwarding it to you. As for the sound on your machine, the sound board is in the top box behind the glass.

Gary

[darwinasm86]

Thanks AMechanic,


      Ive been busy with work so haven't had a chance to work on anything. I finally had a chance to replace the relay and the battery. Now im getting a Tilt and error code 41. I took the battery out because the reset wasn't clearing the error, and after a single spin it and the error code 41 is back.


   Seems to be the nature of the beast, fix one thing, another thing breaks  .


    Any direction on this would be helpful, I'm hoping I don't have to rip the reel assembly apart... error 41 says it can't read the first reel... and when I pulled the handle... it just spins and spins ...


Anyways thanks again for all the  help


P.S. I just sent a donation to the site, absolutely worth it, I wish I could do more 


Jason

[dhellis]

Your error code is an indication of a problem with the reel reader card in slot #1
try swapping that card from 1 over to 3 and see if the error moves with it. You will
likely get an error code 43.

I have written some test procedures for testing these cards and placed them on another
members website,you can find those instructions here

http://www.coinslots.com/tips/bally-e-series/

[darwinasm86]

Thanks Dhellis

[Paul]

One other item is to check the reader openings as
dust will block the light and cause them to fail.