Hi Guys,
Actually, I used the video you refer'd in your reply, thanks!  But the video says NO HOPPER so I did not think that addressed my issue.  Nonetheless, I did set the residual credit as it suggested.
 Thanks for looking into it, I really do appreciate it!

To give a better idea how decent these buttons actually are, here is a picture that represents them pretty well.  These 5 are already sold but the quality of the screen content is on par with these.  The edge-lighting in the picture may be stronger than most is the only real major difference.  Probably have 50+ and again, discounts on quantities.

Re: the lights,

Checking the actual light, socket, and wire connection tab would be first then proceed from there.

The buzz from the handle pull might be coming from the handle release coil/switches.
Try inserting a coin or depressing the coin trip wire. Wait a few seconds and slowly pull the handle.
See if that makes a difference, buzz or no buzz.

The bell and service/change light I believe operate on the same common solid blue wire.
There’s also the red wire that signals the bell when a jackpot is made.
Check the light(s) in the fixture on top of the machine.
The blue and or black/yellow wires should be traceable back to the switch.
Wire colors are from memory and may be different in your machine.

Thats a good reference video Shortrackskater.

Skypilot, After you do the reset are you going into configuration and setting terminal ID 111111111?

Something doesn’t look right in the residual gamble mode, shouldn’t it be Credit?

My setup cheat-sheet says to set coin accept as coin acceptor only. Looks like some machines have coin optic decoders. Mine doesn’t.

Chris

Try this...
https://newlifegames.com/nlg/index.php?topic=35405.0

I thought we had a post specifically detailing the set up procedure but I don't have time right now. I actually have it in a my manuals but will have to check that on Monday.
Hope this video helps though.