11
JCM DBV-45, DBV-145, and DBV-200 Bill Validators / Re: IGT S+ with JCM DBV-200 not working
« Last post by padamez on Today at 06:19:37 AM »It won't attempt to feed any bill....
Welcome to the NewLifeGames.com message forum!
|
11
JCM DBV-45, DBV-145, and DBV-200 Bill Validators / Re: IGT S+ with JCM DBV-200 not working« Last post by padamez on Today at 06:19:37 AM »It won't attempt to feed any bill....
12
JCM DBV-45, DBV-145, and DBV-200 Bill Validators / Re: IGT S+ with JCM DBV-200 not working« Last post by Stayouttadabunker on Today at 06:15:36 AM »I would try to see if it will accept a one dollar bill.
If it does, then the firmware flashed to it needs to be upgraded so it "sees" the large headed bills....one dollar bills are the only ones around with the older small heads on them. 13
JCM DBV-45, DBV-145, and DBV-200 Bill Validators / Re: IGT S+ with JCM DBV-200 not working« Last post by padamez on Today at 06:13:16 AM »From the JCM DBV-200 Bill Validator Operation and Maintenance Manual (Rev B) (I acquired the manual from this from this site)
Referring to the dip switches on board the head. "With the power off, set the DIP switches for the test. Set Bank-2 #6 on. Turn on the power. Turn Bank-2 #6 off. The motor will cycle. Insert a bill." Once this is done the BV is supposed to accept a bill and then spit it out again. I could not contact the owner who was selling the machine thru an antique dealer. There was a note on the machine stating the BV needed an upgrade, but I had no idea what that meant. This problem has existed since purchasing the machine so no I never have seen it work. All associated cables have been checked for broken wires or bent pins, nothing abnormal was found. All I can think of is to try another head 14
WMS Williams Video / Re: BB3 Games« Last post by sstiglich on Today at 06:11:05 AM »I've been trying to get the regular Ironman game to work on my BB3. Driving me nuts for days! Willy Wonka plays perfectly so video and other components are fine. Hi, have you made progress on this? I have a new NXT3.2 conversion with the Gorilla Chief II game, and it has the exact same behavior, touch the touch screen at setup and it crashes. I have not made any changes to the cabinet ID (I expected a proper error if this is the issue) nor do I have any scaler attached. TIA, Steve 15
Bally Electromechanical / Bally 809-N« Last post by caneer on Today at 06:01:13 AM »Hello! I recently acquired this slot and I am looking to find out more about it, model/year/value? If there is anything you can tell me that would be great.
I wanted to find a user manual, there are a few functions that are not working correctly that I wanted to try and get fixed. Thank you for your time. 16
IGT AVP (Including G20,G23) / Re: What type of buttons are these?« Last post by Stayouttadabunker on Today at 05:56:09 AM »I'm not exactly sure what you mean by "thinner" but they ARE different...you bought white ones, instead of the ones with yellow background?
The OLEDs you've put in may not be the exact same size or resolution as the yellow ones that were originally installed on the deck. I would get two more new white ones because if those yellow ones are original, they will die soon. There's a definite life expectancy of them (about 40,000 hours set at half brightness), and most of it was used up when they were ON in the casinos 24/7. Do the math....8,760 hours equals 1 year....except a leap year...lol 17
WMS Williams Video / Re: Looking for 2 BB2 CPU doors.« Last post by mikeyg on Today at 05:49:47 AM »Thanks for the tip. I spoke with Gamblers Oasis and we're all set.
18
WMS Williams Video / Re: Looking for 2 BB2 CPU doors.« Last post by sstiglich on Today at 05:46:18 AM »I went thru spininc.com and used their contact us email to ask about one. It took a day or two, but they have them, and it was inexpensive. I was already planning on ordering something else, so with the combined shipping it was a super good deal. Hopefully this helps!
Steve 19
JCM DBV-45, DBV-145, and DBV-200 Bill Validators / Re: IGT S+ with JCM DBV-200 not working« Last post by Stayouttadabunker on Today at 05:44:19 AM »ok.... if there's no power going thru the harness to the door bezel, that tells us the validator isn't ready to accept bills.
History, did you ever see this bill head work? The seller didn't mention anything about it not working? I wish I could help you further other than for you to re-check the connections to the bill acceptor harness. Make sure no wires are broken on the harness to the pins. I don't know anything about a dip switch #6 test. I've never had to check bill acceptors with that. I just make sure the bill acceptors are flashed correctly, the harnesses are good, the bezel lamps aren't burned out, and the acceptor paths and sensors in the head, are clean. 20
IGT S2000 and Vision Games / Re: IGT Pink panther« Last post by Stayouttadabunker on Today at 05:41:31 AM »Your 1st photo indicates that you've changed the game chip and the MPU is seeing that it's not the correct chip.
Did you mess with them? Opening and closing the door a couple of times should erase all "stacked" error messages. Your green and amber LED lights on the MPU are ok....as long as the red one doesn't light up. Pressing the Test button is only supposed to be for entering programming menus...not for clearing anything - unless you've changed chips. If you're losing settings, your MPU may be suspect. Without me going back thru 120 Reply's, can you post a clear photo of the socketed chips on the MPU? Also, a photo of the green Varta battery and that area. Something is causing that CRC checksum error. That's a major error indicating that the MPU is seeing a possible major programming fault with your Game chip. Finally, if you disable the bill acceptor, how will you get credits on the machine to play? Does the machine have a coin comparitor mechanism? |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |