EPROM burner and UV eraser

[Amechanic]

I was wondering if anyone might have a good used burner and UV chip eraser that they might want to sell. I mostly work on older Bally machines and IGT slots and video poker machines. Figure I'd check here first..

Thanks in advance,  Gary

[FireballJackpot]

You can buy them BRAND NEW for $100.


http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4282


Hope this helps!

[qbert]

I have been using a TL866A and it works great, less than $60 from China
http://www.ebay.com/itm/High-Speed-USB-BIOS-Programmer-TL866A-ICSP-SPI-in-circuit-Programming-Lite-Pack-/151392969548?hash=item233fb9634c:g:mGQAAOSwxH1T--7Y

[gunnerbill]

Ok, to help out. I learned alot from Kirk(of Las Vegas) when he was around. He did alot of programming. I couldn't justify myself in buying a high end programmer.
They cost alot, and I would never use all the functions it can do. So, I went mid-range. Price range between $100.00 to $200.00.
1.   The USB PRO GQ-4X Willem Programmer Light Pack programmer (About $150.00) and is a 40 pin programmer, so if you ever need to program a 42 pin, you'll find
       yourself hunting for another programmer. I have this programmer and it works perfect everytime for 40 pins or less. 
2.   The TL866A is a Mini-Programmer. Programs 40 Pins Eproms. I have this programmer as well. and when it come to programming Sip Sop etc. I found this
       is the best programmer.
3.   But my favorite programmer is the Wellon VP-390.( http://www.weilei.com/VP-390E.htm ) As we were saying before, I needed to program a 42pin. and my
      GQ-X4 wasn't going to work. Had to by another programmer capably of programming a 42pin. It programs just about everything. It is a 48 pin programmer. And I
      used it regularly in programming elevator Circuit Board and other things. (I paid $195.00)

     If you need a programmer, I recommend getting a 48pin programmer. If you are just programming micro-chips (Bio's) get the TL866A.   

[ricker]

Ok, here's the best deal I could find for your needs. USA sellers and free shipping. Total $62.43 for both.


http://www.ebay.com/itm/USB-MiniPro-TL866CS-Universal-BIOS-Programmer-EEPROM-FLASH-8051-AVR-GAL-PIC-WP-/111861945427?hash=item1a0b7dd453:g:tHkAAOSwo3pWg17M

http://www.ebay.com/itm/High-Speed-Ultraviolet-Light-UV-EPROM-Eraser-Erase-Eraseable-Timer-Useful-US-DF-/331769073873?hash=item4d3efa50d1:g:5j0AAOSwL7VWsV2e

[Amechanic]

I ordered these yesterday. For the price I couldn't go wrong. Thanks for everyone's input..

Gary

[qbert]

That's the cs version not the a version they are different the cs is not as versatile but should still work for you.
Make sure you update the hardware and software to the latest version before you use it.

[Amechanic]

I figure if it doesn't preform as needed I'm only out $42.00 and change. I wouldn't be the first time that I screwed up by being cheap.. I just couldn't convince my self to spend the extra money for something I won't use that often, but you know how that goes too, before you know it you find many more uses and you wish that you had not been a cheapskate!! 

[tjlee]

The TL866 will program just about any slot eprom you need up to 40 pins. Big thing on any programmer is the software and the TL866 software is excellent.  I own one and also a USB PRO GQ-4X Willem Programmer--both  are good units and inexpensive. 

[w4coj]

I have a  USB PRO GQ-4X and they make a Daughter board for 42 pin chips also, Have not had any problems with mine.

[gposing]

Ordered by GQ-4X burner today. I have located the blank chips numbers I need except for the S2000 game and Version chips.  If some one could tell me which ones I would need that would be great.

[tjlee]

SG chips are 27c801.  Version chip is a 27c1001.  SB chips are 27c4096 or 27c4002

[gposing]

Thanks